.JPG)
17.51
obd2jombang
Reset Ecu Nissan
Web : www.obd2jatim.com
Blog : http://agusyulianto2.blogspot.com
Sometimes we often find ISC Nisan having workshops hunting or term swing RPMs, Tuktuk the necessary special procedures or terminology Reset Ecu Nissan using a Universal Scanner Support Idle learning or bias also with specialists scan the Scanner Nissan Consult Nissan, but still many of us who do not have a scanner, for it can be done manually as long as the procedure is performed in the order and duration must also be right. The following steps to reset ecu stride Nissan Grand Livina:
1. Hit the gas pedal completely and then position the contact position on selalama wait 3 seconds
2. Step on the Gas Pedal for 5 seconds and off for 5 seconds (this step is done 5 times)
3. After point 2 steps performed 5 times the next step wait 7 seconds and full gas pedal until the Check Engine or blink Blink
4. Remove the Pedal Pedal the gas. See Check Engine still blinking and wait for 10 seconds
5. Hit the gas pedal fully for 10 seconds Check engine still blink
6. After 10 seconds Check engine still blink
7. Turn the ignition key to the OFF position
8. Finish
9. Try to turn the machine off if the Check Engine must check engine light still repeat steps from the beginning
Up here the step to do chaplet reset ecu has done nothing wrong perhaps we apologize and please be revised if there is an error
Thank hopefully useful
Blog:
http://agusyulianto2.blogspot.com
http://obd2murah.blogspot.com
Facebook Agus Yuli Obd Jatim
https://www.facebook.com/obd99
Store / Google map home
https://goo.gl/maps/34NNJ7Ci56m
Web : www.obd2jatim.com
Blog : http://agusyulianto2.blogspot.com
Sometimes we often find ISC Nisan having workshops hunting or term swing RPMs, Tuktuk the necessary special procedures or terminology Reset Ecu Nissan using a Universal Scanner Support Idle learning or bias also with specialists scan the Scanner Nissan Consult Nissan, but still many of us who do not have a scanner, for it can be done manually as long as the procedure is performed in the order and duration must also be right. The following steps to reset ecu stride Nissan Grand Livina:
1. Hit the gas pedal completely and then position the contact position on selalama wait 3 seconds
2. Step on the Gas Pedal for 5 seconds and off for 5 seconds (this step is done 5 times)
3. After point 2 steps performed 5 times the next step wait 7 seconds and full gas pedal until the Check Engine or blink Blink
4. Remove the Pedal Pedal the gas. See Check Engine still blinking and wait for 10 seconds
5. Hit the gas pedal fully for 10 seconds Check engine still blink
6. After 10 seconds Check engine still blink
7. Turn the ignition key to the OFF position
8. Finish
9. Try to turn the machine off if the Check Engine must check engine light still repeat steps from the beginning
Up here the step to do chaplet reset ecu has done nothing wrong perhaps we apologize and please be revised if there is an error
Thank hopefully useful
Blog:
http://agusyulianto2.blogspot.com
http://obd2murah.blogspot.com
Facebook Agus Yuli Obd Jatim
https://www.facebook.com/obd99
Store / Google map home
https://goo.gl/maps/34NNJ7Ci56m
Posted in: 
.JPG)
